Find 2mm Transparent Anti-UV Polycarbonate PC Sheet, Solid Black Glass Plastic Polycarbonate Sheet, Inflaming Retarding Polycarbonate Clear Sheet on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Acrylic Block / Logo > 0.5mm tinted block polycarbonate pc solid sheet

0.5mm tinted block polycarbonate pc solid sheet

  • 0.5mm tinted block polycarbonate pc solid sheet
  • 0.5mm tinted block polycarbonate pc solid sheet
  • 0.5mm tinted block polycarbonate pc solid sheet
  • 0.5mm tinted block polycarbonate pc solid sheet

0.5mm tinted block polycarbonate pc solid sheet

    Payment Type: T/T,D/P,Paypal,Money Gram,Western Union
    Terms of Trade: FOB,CFR,CIF,EXW,FCA,CPT,CIP
    Min. Order: 1 Piece/Pieces
    Delivery Time: 5 Days
    Packaging: Export carton pallet
    Brand: HONY
    Transportation: Ocean,Land,Air
    Place of Origin: CHINA
    Supply Ability: Enough
    Certificate: SGS RoHS Reach ISO9001
    Port: Shenzhen,Guangzhou,Hongkong

Basic Info

Model No.: HONYPC

Product Description

HONY®Polycarbonate solid sheet It has a very high light transmittance, up to 89%, just like glass, but compared with glass, it is light, easy to install and easy to transport; It also has good impact resistance. The impact strength is 250-300 times that of ordinary glass, 30 times that of acrylic plate with the same thickness, and 2-20 times that of tempered glass. There is no crack when it falls two meters below 3kg hammer. It has the reputation of "unbreakable glass" and "Xianggang";

3. UV protection. One side of PC board is coextruded with UV resistant coating, and the other side is provided with anti condensation treatment, which integrates the functions of UV resistance, heat insulation and anti fogging. It can prevent ultraviolet rays from passing through, and is suitable for protecting valuable artworks and exhibits from ultraviolet rays;

4. Light weight, the proportion is only half of the glass, saving the cost of transportation, handling, installation and supporting frame;

5. Good flame retardancy, according to the detection, it is the first level of flame retardant, its own ignition point is 580 ℃, and it will be self extinguished after leaving the fire, so it will not produce toxic gas during combustion, and will not promote the spread of the fire;

6.At the same time, it also has good weather resistance, sound insulation and bending.


Product shortcomings: intolerant to strong acid, intolerant, intolerant to alkali


Scope of application: electronics/electrical, construction, automobile industry, mechanical processing, daily necessities, etc.


Application areas: prototype models, CDs, instruments, meters, high and low voltage switch cabinet panels, aviation transparent containers, motorcycle front windshields, airplanes, trains, ships, automobiles, motorboats, submarines and glass military and police shields, telephone booths, advertising road signs, light boxes Advertising, display and exhibition layout, highway and urban elevated road noise barriers, agricultural greenhouses and breeding sheds, etc.


Benefits

1)High impact resistance - virtually unbreakable

2)High clarity and light transmission

3)Weather and UV resistant

4)Wide service temperature range

5)Blocks harmful UV radiation

6)Good acoustical insulation

7)Lightweight

8)Easy to handle and install

9)Versatile, formable, and machinable


Applications

1)Architecture: Transparent acoustic barriers, Sport venues, Skylights, Shopping centers, Covered walkways

2)Construction: Sun rooms and conservatories, Pergolas and covered patios

3)Safety and Security Glazing: Safety glazing, machine guards, Bus stops and telephone booth

4)Shields for police and security forces, Glazing in public transportation, Safety windshields for cars, Eye protection visors for helmets

5)Sign & Display: Signs, public sign guards, Displays, P.O.P stands, Illuminated signs, light fixtures

6)Fabrication: Thermoformed, vacuum formed, bent and fabricated items



HONYPC Technical Data Sheet


Property item Testing method Unit Testing data
Mechanical properties
Density ASTM D792 g/cm3 1.2
Tensile strength at yield
ASTM D638 Mpa 60
Elongation at break
ASTM D638 % 11
Bending strength
ASTM 790 Mpa 100
Flexural modulus
ASTM 790 Mpa 2200
Shore Hardness
ASTM D2240 D 85
Impact strength
ASTM D256 J/M 800
Thermal performance
Melting point
DSC 240
Heat distortion temperature
ASTM D648 135
Long-term working temperature
- 120
Short-term working temperature
- 145
Thermal conductivity
DIN 52612-1 W/(K-M) 0.5
Coefficient of linear expansion
ASTM D696 10-5-1/K 5.6
Electrical properties
Dielectric strength
ASTM D150 KV-mm 27
Dielectric loss coefficient
ASTM D150 - 0.009
Volume resistance
ASTM D257 Ω.cm


10^14


Surface resistance
ASTM D257 Ω 10^16
Dielectric constant
ASTM D149 - 25.2
Chemical properties
Balanced water absorption
23℃ 60%RH % 0.15
Acid resistance
23℃ 60%RH
-
Alkali resistance


+
Acid and alkali water resistance


+
Chloric acid and alkali resistance


0
Resistant to aromatic compounds


+
Copper resistance

23℃ 60%RH


+
Hot water resistance
23℃ 60%RH
+
Other properties
Combustibility
UL 94
V-2
Stickiness


+
toxic free and safe
EEC 90/128 FDA
+
Coefficient of friction
DIN 53375
0
anti-UV
-
-

Remark:

1."+" Tolerable , “-”Intolerable , "0" Depends on the situation

2. The above data is obtained from raw material test data, which is not completely consistent with the performance of the finished product, and the uniqueness of the data is not guaranteed



Color choose

PC sheet

Main product

PCC-6PCC-7PCC-8PCC-9


PC sheet-8PC sheet-9PC sheet-10


Application

PC sheet-11



Workshop

PC-8


Our Partner

PC partner

Certificate

PC cer


Package

PC package


FAQ


Q1: What's your main products?

We are an experienced manufacturer & exporter of engineering plastic products for 15 years.


Q2: What is your delivery time?

It depends on your ordered item and quantity. Normally, we can finish the bulk products within 25 days.


Q3: Can I request samples?

Yes, of course. we can send you the sample and the cost of sample is free.


Q4: What's the shipping way?

We will provide a good suggestion for delivering the goods according to the size of the order and the delivery address.

For a small order, We will suggest to send it by DHL, UPS or the other cheap express so that you can get the products fast and safety.

For a big order, we can delivery it according to client's requests.


Q5: How can you ensure the quality Inspection?

During ordering process, We have the inspection standard before delivery according to ANSI/ASQ Z1.42008, and we will provide the

photos of the bulk finished products before packing.


Q6: Can you accept OEM?

Yes, of course. Any logo is acceptable.





Hony Engineering Plastics Co.,Ltd.

 

HONY Engineering Plastics Co., Ltd is a national high-technology enterprise integrating R&D, production and sell a wide range of engineering plastics in semi-finished format such as sheets, plates , rods, tubes, flat bars, profiles and finishing machining right through to precise machined parts. Value added services include: Saw Cutting, Laser Cutting & Etching, Routing, Welding, Drilling, Bending, Forming, Polishing, Gluing, Injection Molding & CNC Milling. Since its inception, the company has been adhering to the philosophy of technical service customers, and has assembled a professional technical team with more than ten years of experience in precision processing of plastic semi-finished products and plastics, dedicated to aerospace, medical equipment, semiconductor industry, communications, mechanical equipment manufacturing, hardware and electrical appliances, the ship industry, mining machinery, petrochemical machinery and many other industries. To provide customers with one-stop service, the links include pre-sale material selection, integrated sales processing solutions, and after-sales tracking products.


Its registered brand is HONY,HONYPRO,HONYPLAS,HONYESD,HONYFLUO. We always adhere to the principle of "low cost, high quality" to provide customers with customized solutions for engineering plastics, and to serve customers with high-quality products and technologies. Welcome to contact us, HONY will serve you wholeheartedly.


HONY Workshop have 2 axis, 3 axis, 4 axis, 5 axis with HAAZ machining center and SWISS machining center.

Company Info

  • Company Name: Hony Engineering Plastics Co.,Ltd.
  • Representative: ZOU SHU YA
  • Product/Service: Plastics Sheet , Plastics Rod , CNC Plastic Machined Parts , CNC Metal Machined Parts , Plastics Injection Molding , Antistatic Material
  • Capital (Million US $): 200万
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): Above US$100 Million
  • Export Percentage: 91% - 100%
  • Total Annual Purchase Volume (Million US $): Above US$100 Million
  • No. of Production Lines: 38
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: 3rd Floor,Building 9,Wu Shi Gang Industry Zone,Dalang street,Longhua District,Shenzhen,Guangdong province,China
  • Contact Person: Ms. Tina
  • Tel: +86-755-21045157
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters